ProTeam Polyquat 60 - 1 qt.

ProTeam Polyquat 60 is an algae preventative for hard-to-kill mustard, black, and blue-green algae types. This product is non-metallic and non-staining. It also reduces sanitizer consumption and is not affected by high chlorine residuals. Proteam Polyquat 60 promotes sparkling blue pool water. This algaecide is highly concentrated. Best of all, Polyquat 60 is made right here in the USA to ensure the highest quality, allowing you to buy with confidence.

Product Dosage

Initial Treatment:

6-11 fl oz per 10,000 gallons of water.

Routine Maintenance:

2-4 fl oz per 10,000 gallons of water per week

Visible Algae:

11-17 fl oz per 10,000 gallons of water.

Directions

1. This product is used to control the growth of algae in swimming pools, exterior spas, whirlpools, hot tubs, decorative fountains, and ponds that do not contain fish.
2. For maximum effectiveness pools, spas, whirlpools, hot tubs, decorative fountains, and ponds containing heavy growth of algae should be cleaned prior to using this product.
3. For pools having just visible algae growth add an initial dose of 11 to 17 oz. of this product per 10,000 gallons of water and remove settled algae debris by cleaning.
4. For treatment of a freshly cleaned and filled pool add initially 6 to 11 oz. of this product per 10,000 gallons of water.
5. Subsequent additions of 2 to 4 oz. of this product per 10,000 gallons of water should be made every 5 to 7 days after initial treatment for maintenance.
6. Spas, whirlpools, hot tubs, decorative fountains, and ponds having just visible algae growth require an initial dose of 1 to 2 oz. of this product per 1,000 gallons of water.
7. For treatment of a freshly cleaned spa, whirlpool, hot tub, decorative fountains, and ponds add initially 0.6 to 1.1 oz. of this product per 1,000 gallons of water.
8. Subsequent additions of 0.2 to 0.4 oz. of this product should be made every 5 to 7 days after initial treatment for maintenance.
9. This product will prevent growth of most algae during the off-season winter months when pools are not in use.
10. For pools which have been properly treated during the swimming season and are free of visible algae, add 8 to 10 oz. of algaecide per 10,000 gallons of water.
11. If at the end of swimming season pools have some visible algae growth, add 12 to 17 oz. per 10,000 gallons.
12. It is necessary that a uniform distribution of algaecide throughout the water and the pool be made for maximum effectiveness.
13. If pool is not covered, it may be necessary to repeat the treatment one or more times during the off season.